Ghost Immobiliser Fitting
Secure your vehicle from theft of keys, cloning and hacking with the first aftermarket CAN immobiliser. The Ghost app and GPS tracking can be connected to the immobiliser to give you alerts when your vehicle is taken or damaged.
Installing an Ghost immobiliser is a breeze for a skilled technician. It is essential to have the right tools and heat shrink tubing.
Getting Started
In contrast to physical security devices like wheel locks or car alarms, ghost immobilisers protect your vehicle without the need of key fobs or LED indicators. Instead, they connect directly to the ECU's CAN data network and can only be started after entering a PIN sequence. This provides a much more secure level of protection from key hacking, cloning and even ECU swapping.
As a result, installing a ghost immobiliser Birmingham must be completed with great agility and precision. It can be a bit like navigating an icy minefield. One mistake could cause irreparable damage to the circuits of your vehicle's electrical system. To avoid this, it's crucial to be aware of the procedure for installing and prepare your vehicle accordingly.
You will need to remove interior panels from the vehicle to make room for your immobiliser. Once you've found the ideal place to conceal it put it in place using cable ties to prevent it from being removed or damaged. Clean up your wiring by tying loose wires down and using insulation tape to cover the exposed connections. This will reduce the risk of a short circuit that is not intended to happen while also improving the appearance and reducing the chances of theft.
Identify a constant source of 12V power, and a grounding for the ghost immobiliser. Once you have located them test the power cables with a multimeter. Then, connect the CAN H and CAN L wires from the immobiliser to the identified power source and grounding point.
It is essential to ensure that all connections are checked and examine the immobiliser for indications of corrosion. Entering a PIN and starting the car is a good way to test the system. This should be part of your routine, as it will allow you to spot any intermittent problems early. Regular testing can help to extend the life of the device, and ensure it's running at its peak performance.
Preparing the Vehicle
Installing a Ghost immobiliser requires the right skills and knowledge. A wiring diagram is crucial for locating the correct wires, establishing precise connections and ensuring security. A multimeter can be used to check electrical values and guarantee security. Insulation tape and cable ties can be used to shield the connections from tampering and to ensure they are secured. Finally, a user guide will provide specific directions specifically tailored to the Ghost Immobiliser model you have.
Once installed, a ghost immobiliser can stop an unauthorised engine from starting by requiring the owner to input a unique PIN code sequence using buttons on the steering wheel or on the centre console. This can be accomplished manually or remotely via a mobile phone app, and the code is able to be modified by the vehicle's owner at anytime. The device is also silent and is unnoticeable to thieves as it doesn't emit radio frequencies.
A ghost immobiliser is directly connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs, and blocks the engine if a false signal is identified. The system is tamper-proof as well as weatherproof, and does not include key fobs or LED indicators to attract the attention of thieves.
It can be positioned behind or in a more obscure area so that it's not visible to thieves, and does not interfere with vehicle's performance. It can be mounted in a small jar, so it is less likely to be observed by fraudulent salespeople when they test drive.
Its low-profile operation and integration with the vehicle's CAN bus system make it an effective deterrent against modern methods of theft, including key cloning and signal relay attacks. The system can be combined with other security measures to create a formidable barrier that can thwart even the most obstinate thieves. This is the reason why more insurance companies are recommending or even requiring ghost immobilisers be installed, since it will significantly lower monthly premiums.
Making the Connections
Unlike traditional security systems that are heard by thieves, ghost immobilisers are silent and keep them from being aware that your vehicle has been turned on. They also stop high tech methods of theft, like OBD hacking. Installing them without leaving permanent marks on your car is a great option for those who plan to sell the vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the most recent and most reliable options to stop car theft. It blocks your engine through the CAN data network and creates a unique PIN code that is difficult for criminals. It can be fitted in a variety of vehicles and works with many available features, including car alarms and GPS trackers, steering wheel locks, and door lock bypass systems.
If you choose to use an Ghost immobiliser for your vehicle, make sure to consult the wiring schematic to identify the wires that connect. Double-check the locations of these wires to ensure accuracy and mark them with tape or labels to help you keep the track of them. It is also necessary to locate a source of constant power (12V) and a grounding point to the system. Once you have the necessary components, you can begin making the connections to complete the installation.
If the ghost immobiliser is connected to the CAN bus, it will block your vehicle from starting unless you enter a pin code through the buttons on the dashboard or steering wheel. This will stop ECU hacking, key cloning, and other methods of vehicle theft. It can also be combined with other Thatcham approved security accessories such as alarms or tyre clips to give your car an even greater security level.
As the UK automotive industry continues to expand, as do the options available for securing your car. There are a myriad of ways that thieves can get into your vehicle and steal it, which is why it's crucial to do all you can to prevent it from being taken. Ghost immobilisers are a popular option among car owners who are responsible.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from running until a specific PIN code is entered. This makes it extremely difficult for thieves to steal your key fob and then start your vehicle, and more difficult to disable the system through hacking into its electronics.
Ghost Immobilisers are also able to be utilized together with GPS tracking devices that will help you track your vehicle and track it if it's stolen. This is a feature that isn't often found in security products that are sold aftermarket however it's a great option to increase the security of your vehicle and provide you with peace of mind.
In addition to offering enhanced security in addition to providing enhanced security, the Ghost-II immobiliser also provides a comfortable user experience by eliminating the requirement for additional key fobs and devices. It features a simple, easy PIN code entry system that works seamlessly with your everyday routine. It also offers options for deactivation and features that let you temporarily disable the immobiliser valet parking or for servicing.
Before beginning the installation process, familiarise yourself with your vehicle's wiring and prepare the necessary tools. A basic set of tools will allow you to make precise connections. A multimeter can be used to check electrical values. Insulation tape and heat shrink tubing are essential for protecting connections from short circuits, while cable tie can be used to hold the wire in place. It is also essential to work in a space which is well-lit and wear safety gear when using electrical equipment and components.
You should test the Ghost immobiliser after you have completed the installation to make sure it's working correctly. It is recommended to first start the car without entering the PIN. If this fails, you will need to test again and examine the connections more thoroughly.
In contrast to other security systems unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is much more effective than traditional deterrents like wheel clamps or steering locks. It is TASSA recognized and approved by a few insurance companies, which makes it an investment that is cost-effective and can give you the peace of mind you deserve.